[giaban]Giá: Liên hệ[/giaban]
[hinhanh]
[/hinhanh]
[tomtat]
Giá: Liên hệ
Xuất xứ: USA
Bảo hành: 12 tháng
[/tomtat]
[kythuat]
Công ty Pitesco là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực.
NEW MF727xS
Industrial Media Converter
Fiber Optic Ethernet Fast Ethernet 10/100Base TX to 100Base FX
KEY FEATURES
- Supports full wire speed conversion
- Supports auto-negotiation 10/100 Mbps
- Auto MDI/MDI-X crossover on the copper port
- Provides Link Fault Pass Through function
- Provides comprehensive manual configuration settings
- Transparent conversion to 802.1Q VLAN tagged packets
- Provides Far End Fault Function on fiber port
- Low power consumption
- Two power options: screw terminal block and DC jack
- Supports wide power input voltage range
- Supports DIN rail mounting and panel mounting
- Supports wide operating temperature range
- Industrial-rated emission and immunity performance
SPECIFICATIONS
| Conversion: | 10Base-T to 100Base-FX
100Base-TX to 100Base-FX |
| Conversion Methods: | Smart-forward mode:
Store-and-Forward for 10M to 100M
Direct conversion for 100M to 100M
Store-and-Forward always mode |
| Packet Types: | Transparent conversion with no modification to:
Standard IEEE 802.3 Ethernet packet frames
IEEE 802.1Q tagged packet frames |
| Copper Port (TP): | Shielded RJ-45 jack
Auto MDI/MDI-X Crossover Function
Auto-negotiation function for speed and duplex mode
Full-Duplex and Half-Duplex Support
10Mbps - Supports Cat. 3,4,5 UTP Cable up to 100m
100Mbps - Supports Cat.5 UTP Cable up to 100m |
| Fiber Port (FX): | Multimode ST or SC, Singlemode SC
100Mbps Full Duplex and Half-Duplex Support
Far End Fault Indication Support |
| Flow Control: | IEEE 802.3x for full-duplex
Back Pressure for Half-Duplex |
| LEDs: | Power Status
TP Port Link, Activity, Speed, Duplex Status
Per FX Port Link, Activity, Ooptical Link Status |
| Configuration: | Auto/Forced Mode, TP Speed, TP Duplex, FX Duplex |
| Environment: |
| OperatingTemperature: | -10º ~ 70º C |
| StorageTemperature: | -20º ~ 85º C |
| RelativeHumidity: | 5% ~ 90% non-condensing |
| Dimensions: | 1.10 x 3.23 x 3.74 inches (28 x 82 x 95 mm)(L x W x H) |
| Power Consumption: | 3 Watts (max.) @ 30VDC power input |
| DC Power Input: | Screw Terminal Block: 2 pairs of ± contacts
DC Jack: -D 6.3mm / +D 2.0mm
Operating Voltage range: +7 ~ +30VDC |
| Housing: | Enclosed metal, no fan |
| Power Supply: | 100-240VAC, 50/60Hz - Consumption =30W |
| Mounting Support: | Din Rail, Panel |
| Approval: | FCC Class B, CE/EMC Class B, EN60950 |
|
Model
|
Fiber Port
|
Wavelength
|
Tx Power
(dBm)
|
Rx Sens
(dBm)
|
Rx Max.
(dBm)
|
|
MF7273S
|
MM, ST, 2km
|
1310nm
|
−19 ~ −14
|
−31
|
−14
|
|
MF7274S
|
MM, SC, 2km
|
1310nm
|
−19 ~ −14
|
−31
|
−14
|
|
MF7275S-2
|
SM, SC, 20km
|
1310nm
|
−15 ~ −8
|
−30
|
−7
|
|
MF7275S-5
|
SM, SC, 50km
|
1310nm
|
−5 ~ 0
|
−35
|
−3
|
|
MF7275S-7
|
SM, SC, 70km
|
1310nm
|
−5 ~ 0
|
−35
|
−3
|
|
MF7275S-9
|
SM, SC, 90km
|
1550nm
|
−5 ~ 0
|
−35
|
−3
|
|
MF7275S-2SFA
|
SM, SC, 20km
(Single Fiber)
|
Tx: 1310nm
Rx: 1550nm
|
−14 ~ 8
|
−31
|
0
|
|
MF7275S-2SFB
|
SM, SC, 20km
(Single Fiber)
|
Tx: 1310nm
Rx:1310nm
|
−14 ~ 8
|
−31
|
0
|
|
|
[/kythuat]
[mota]
Catalogue
[/mota]
