[giaban]Giá: Liên hệ[/giaban]
[hinhanh]
Xuất xứ: USA
Bảo hành: 12 tháng
[/tomtat]
[kythuat]
Công ty Pitesco là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực.
Liên hệ cho chúng tôi theo số | để CÓ thông tin mà Quý khách CẦN.
- Mr Mai Nghĩa -
< Sales Engineer>
Email : nghia.pitesco@gmail.com
Yahoo : nghia.pitesco
Skype : nghia.pitesco
web: pitesvietnam.com
- Mr Mai Nghĩa -
< Sales Engineer>
Email : nghia.pitesco@gmail.com
Yahoo : nghia.pitesco
Skype : nghia.pitesco
web: pitesvietnam.com
M727xSA "Double-Duty" Selectable10/100TX-100FX Media Converter
Formerly M727xS
Formerly M727xS
Attention 10Base Users:
This product will allow you to get 100Base speeds over your 10Base network!
Once the 10Base signal is converted to fiber, the signal will then travel 100 Mbps when using the "Double-Duty" 10/100 media converter.
Once the 10Base signal is converted to fiber, the signal will then travel 100 Mbps when using the "Double-Duty" 10/100 media converter.
These converters are standalone devices, but they can also be installed in a MCC-14R rackmount chassis with redundant power. In addition, the M727xSA boasts options of long-haul optics with distance capability up to 90km with redundant power.
KEY FEATURES
- FEFI Far End Fault Function
Each TP port supports auto-negotiation and auto-MDI/MDI-X detection - Supports 10/100M dual speed on TP connections
- Converts speed and media type
Link fault pass-through function - 128Kb RAM data buffer
Standalone or chassis installation in MCC-14R - Optional DIN rail mounting
- USB power port
Low power consumption Supports wide range of fiber options
- ST, SC, Single SC
- Multimode fiber, Single mode duplex fiber, Single mode single fiber
- Short haul, Medium haul, Long haul fiber connections
Provides optional user-accessible settings for specific system applications
| Cables: | Cat. 5 UTP MMF: 62.5/125µm, 50/125µm SMF: 9/125µm | |
| TP Port: | 802.3 10BaseT, 802.3u 100BaseTX Shielded RJ-45 jacks with Auto MDI/MDI-X detection Auto-negotiation for speed and duplex auto detection Forced mode with speed and duplex settings Speed for 10Mbps or 100Mbps Full duplex or half-duplex support | |
| FX Port: | 802.3u 100BaseFX compliant Forced 100Mbps, Full duplex (factory default) Far end fault Function | |
| Packet Size: | Up to 1600 bytes for store-and-forward mode No packet size limit for smart-forward mode (100-to-100) | |
| LED Indicators: | Unit Power Status Copper Port: Link/Activity/Speed/Duplex status Fiber Port: Link/Activity Status, Fiber signal detected | |
| DIP Switches: | Copper Port: Mode, Duplex, Speed, Link fault pass through Auto status report | |
| Environment: | ||
| -5º C to +60º C | ||
| -20º C to +70º C | ||
| 5% to 90% non-condensing | ||
| Dimension: | 3.70 x 2.79 x 1.02 inch (L x W x H) | |
| Power Consumption: | 2 Watts (max.) | |
| Power Input: | +5VDC to +18VDC | |
| Weight: | .47 lb (213g) | |
| Model | Connector | Fiber Cable | Wavelength | TX Power | RX Sensitivity | Max Distance |
|---|---|---|---|---|---|---|
| M7273SA | ST Duplex | MMF | 1310nm | -14 ~ -9dBm | -34dBm | 2 km |
| M7274SA | SC Duplex | MMF | 1310nm | -14 ~ -9dBm | -34dBm | 2 km |
| M7275S-2A | SC Duplex | SMF | 1310nm | -13 ~ -4dBm | -33dBm | 20 km |
| M7275S-5A | SC Duplex | SMF | 1310nm | -5 ~ 0dBm | -36dBm | 50 km |
| M7275S-9A | SC Duplex | SMF | 1310nm | -5 ~ 0dBm | -36dBm | 90 km |
| M7275S-2SFAA | SC Single Fiber | SMF | TX 1310nm | -12 ~ -3dBm | -35dBm | 20 km |
| M7275S-2SFBA | SC Single Fiber | SMF | TX 1550nm | -12 ~ -3dBm | -35dBm | 20 km |
| M7275S-4SFAA | SC Single Fiber | SMF | TX 1310nm | -5 ~ 0dBm | -36dBm | 40 km |
| M7275S-4SFBA | SC Single Fiber | SMF | TX 1550nm | -5 ~ 0dBm | -36dBm | 40 km |
[mota]
Catalogue
[/mota]